Onkyo BD-SP809

RS232
Baudrate: 9600
Databits: 8
Parity: None
Stopbits: 1

TCP/IP
Port: 60128

USED FOR RS232
Power On - !7PWR01<cr>
Power Standby - !7PWR00<cr>
Power Toggle - !7PWR02<cr>
Up - !7OSDUP<cr>
Down - !7OSDDN<cr>
Left - !7OSDLF<cr>
Right - !7OSDRH<cr>
Enter - !7ENT<cr>
Change Subtitle - !7SUB<cr>
Subtitlte ON/OFF - !7SUO<cr>
Stop - !7STP<cr>
Pause - !7PAS<cr>
Play - !7PLYUP<cr>
Skip FWD - !7SKPUP<cr>
Skip RWD - !7SKPDN<cr>
Fast Forward - !7SCNUP<cr>
Fast Rewind - !7SCNDN<cr>
Menu - !7MNU<cr>
Back - !7RET<cr>
USED FOR TCPIP
Power On - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PWR01<cr>
Power Standby - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PWR00<cr>
Power Toggle - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PWR02<cr>
Up - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7OSDUP<cr>
Down - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7OSDDN<cr>
Left - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7OSDLF<cr>
Right - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7OSDRH<cr>
Enter - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7ENT<cr>
Change Subtitle - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7SUB<cr>
Subtitlte ON/OFF - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7SUO<cr>
Stop - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7STP<cr>
Pause - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7PAS<cr>
Play - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PLYUP<cr>
Skip FWD - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PLYUP<cr>
Skip RWD - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7PLYDN<cr>
Fast Forward - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7SCNUP<cr>
Fast Rewind - ISCP<x00><x00><x00><x10><x00><x00><x00><x06><x01><x00><x00><x00>!7SCNDN<cr>
Menu - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7MNU<cr>
Back - ISCP<x00><x00><x00><x10><x00><x00><x00><x04><x01><x00><x00><x00>!7RET<cr>

ISCP Blu-ray Player v102

Planar UR9850 / 8450

RS232
Baudrate: 19200
Databits: 8
Parity: None
Stopbits: 1

UDP/IP
Port: 57

Power On

(PWR=1)<cr>

Power Off

(PWR=0)<cr>

EDID Type

(EDT=x)<cr>

Switch out x with desired value
0 – 4K 30Hz Preferred EDID
1 – 1080p Preferred EDID
2 – 960×2160 Preferred EDID
3 – 1920×2160 Preferred EDID
4 – 4K 60hz Preferred EDID

Input Mode

(INM=x)<cr>

Switch out x with desired value
0 – Single Input
2 – Multiple Inputs

Input Source (Single Input Mode Only)

(INS=x)<cr>

Switch out x with desired value
0 – Displayport 1
1 – Displayport 2
2 – Displayport 3
3 – Displayport 4
4 – HDMI 1
5 – HDMI 2
6 – HDMI 3
7 – HDMI 4

Multiple Input 1 (TopLeft Corner)

(MI1=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 1
2 – HDMI 1

Multiple Input 2 (TopRight Corner)

(MI2=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 2
2 – HDMI 2

Multiple Input 3 (BotLeft Corner)

(MI3=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 3
2 – HDMI 3

Multiple Input 4 (BotLeft Corner)

(MI4=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 4
2 – HDMI 4

Source Setup All

(SSA=aabbccddeeff)<cr>

Switch out aabbccddeeff with desired value
String format = “aabbccddeeff”,
where:
“aa” is the Input Source value, in hex.
“bb” is the Input Mode value, in hex.
“cc” is the Multiple Input 1 setting, in
hex.
“dd” is the Multiple Input 2 setting, in
hex.
“ee” is the Multiple Input 3 setting, in
hex.
“ff” is the Multiple Input 4 setting, in
hex.

Splash Enable

(SPE=x)<cr>

Switch out x with desired value
0 – Off
1 – Landscape
2 – Portrait

Standby Mode

(STB=x)<cr>

Switch out x with desired value
0 – Low Power
1 – Fast Startup

PlanarUR9850api

Philips BDL Series Screen

I used the RS232 commands which the api guide documents very well. However to figure out which port to send the commands to I had to nmap the screen where I saw 2 ports open which was 2323 and 5000. However If you want to controll it over RS232 you will need a nullmodem cable.

To control the screen on and off you need these commands

Port: 5000
Commands;

Power On

<x05><x01><x18><x02><x1E><x0D>

Power Off

<x05><x01><x18><x01><x1D><x0D>