Planar UR9850 / 8450

RS232
Baudrate: 19200
Databits: 8
Parity: None
Stopbits: 1

UDP/IP
Port: 57

Power On

(PWR=1)<cr>

Power Off

(PWR=0)<cr>

EDID Type

(EDT=x)<cr>

Switch out x with desired value
0 – 4K 30Hz Preferred EDID
1 – 1080p Preferred EDID
2 – 960×2160 Preferred EDID
3 – 1920×2160 Preferred EDID
4 – 4K 60hz Preferred EDID

Input Mode

(INM=x)<cr>

Switch out x with desired value
0 – Single Input
2 – Multiple Inputs

Input Source (Single Input Mode Only)

(INS=x)<cr>

Switch out x with desired value
0 – Displayport 1
1 – Displayport 2
2 – Displayport 3
3 – Displayport 4
4 – HDMI 1
5 – HDMI 2
6 – HDMI 3
7 – HDMI 4

Multiple Input 1 (TopLeft Corner)

(MI1=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 1
2 – HDMI 1

Multiple Input 2 (TopRight Corner)

(MI2=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 2
2 – HDMI 2

Multiple Input 3 (BotLeft Corner)

(MI3=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 3
2 – HDMI 3

Multiple Input 4 (BotLeft Corner)

(MI4=x)<cr>

Switch out x with desired value
0 – Based on Input Source
1 – Displayport 4
2 – HDMI 4

Source Setup All

(SSA=aabbccddeeff)<cr>

Switch out aabbccddeeff with desired value
String format = “aabbccddeeff”,
where:
“aa” is the Input Source value, in hex.
“bb” is the Input Mode value, in hex.
“cc” is the Multiple Input 1 setting, in
hex.
“dd” is the Multiple Input 2 setting, in
hex.
“ee” is the Multiple Input 3 setting, in
hex.
“ff” is the Multiple Input 4 setting, in
hex.

Splash Enable

(SPE=x)<cr>

Switch out x with desired value
0 – Off
1 – Landscape
2 – Portrait

Standby Mode

(STB=x)<cr>

Switch out x with desired value
0 – Low Power
1 – Fast Startup

PlanarUR9850api

Leave a Reply

Your email address will not be published. Required fields are marked *